Wash X, pre coating and washing

The Wash X is a unit developed for the inkjet fabric printing. Designed to provide continuous process of fabric preparation and fabric washing for the digital printing. Two machines incorporated into one unit, they are capable of coating and washing almost any kind of fabric. Fabric washing is continuous, suitable for all type of inks and is design to save as much water as possible. For coating, the amount of coating emulsion could be adjusted to suit all types of dyes, including reactive, acid and disperse dyes.

wash_x1600

Overview

  • WASH X: Fabric unwinding device with fabric tension roller for fabric rolls of 350mm
  • Fabric join bar with needle holder
  • The dryer is infra-red, double walled and is fully insulated to minimize any heat loss.
  • The heating and regulation are controlled via a digital temperature controller situated on the electrical cabinet
  • Small exhaust fan is situated on top of dryer.
  • Available in two versions : 1600 and 1850
  • Read moer about our Stream XL.

Technical specifications

Version 1600

Version 1850

units

Fabric Maximum Width

mm

1600

1850

Maximum Temperature

C

180

180

Maximum Speed

linear m/hr

100

230

Machine Length

m

3.35

4.8

Machine Width

m

2.5

2.7

Machine Height

m

2.02

2.4

Tank Capacity

L

100

2 x 340

Water Consumption

L/hour

250

450

Power Supply

220/380V, 50Hz or 110V, 60Hz

220/380V, 50Hz or 110V, 60Hz

Power Consumption

kW

37

90

Fabric Roll Diameter max.

mm

350

350
UA-66662499-1